Keyless Entry Keypad Code Programming
NOTE: The system only allows one personal code to be programmed. Any existing personal code does not need to be erased to program a new code.
- Enter the permanent factory remote keyless entry (RKE) keypad code
- Press the 1/2 button within 5 seconds to activate the programming mode
- Holding the 1/2 button for more than 2 seconds after activation erases the stored personal code
- Within 5 seconds, enter the new 5-digit RKE keypad code. The door locks lock and unlock to confirm the new code is programmed. Entering any new personal code automatically erases the old personal code