If you shop at Amazon.com (for anything), use this link to support FordTaurus.net!

P0016, p0017, p0018, p0019

Post Reply
bmason777
New Member
Posts: 1
Joined: Sat Aug 24, 2019 8:24 pm
Vehicle: 2013 taurus SEL

P0016, p0017, p0018, p0019

Post by bmason777 » Sat Aug 24, 2019 8:28 pm

I have a 2013 Ford Taurus with 110k miles. Recently the check engine light came on so I got the ole' trust scan tool out, and pulled these 4 codes all pointing to engine timing. My engine is running fine, every 10 starts or so, it does have a little bounce to the idle but nothing major. Could this possibly be a fuse, or is it timing related.


Hadi.b
New Member
Posts: 7
Joined: Sun Aug 25, 2019 6:57 am
Vehicle: SE

Re: P0016, p0017, p0018, p0019

Post by Hadi.b » Sun Aug 25, 2019 8:11 am

its

Crankshaft Position Camshaft Position Correlation " Sensor " , Try and Clear The Code First . if it come back again then i advice u go to the dealer ! .

fuzzeedyse105
New Member
Posts: 1
Joined: Wed Aug 28, 2019 4:56 pm
Vehicle: 2013 Ford Taurus

Re: P0016, p0017, p0018, p0019

Post by fuzzeedyse105 » Thu Sep 12, 2019 11:12 am

Did you ever figure out what this was? this dealership i went to couldnt even figure it out, they wanted to charge me $1325 just to go in and snoop around for the issue. ridiculous

Post Reply