If you shop at Amazon.com (for anything), use this link to support FordTaurus.net!

Auto-lock and auto unlock enable 2014 interceptor sedan

Post Reply
Faldo
New Member
Posts: 7
Joined: Fri Jul 26, 2019 4:12 pm
Vehicle: 2014 police interceptor sedan

Auto-lock and auto unlock enable 2014 interceptor sedan

Post by Faldo » Thu Aug 08, 2019 11:19 am

Has anyone been successful in getting auto-lock and auto-unlock to work on an interceptor sedan? I enabled the feature with Forscan (it also shows up in the instrument cluster) but the locks won't engage. I have the remote lock, and remote start enabled and both of those are operational, so I thought auto-lock would work. I followed the Ford programming to enable or disable auto-lock:

Close all the doors.
Make sure that the ignition switch is in the ’OFF’ position.
Turn the ignition switch from ’OFF’ to ’RUN’.
Press the power door lock ’UNLOCK’ button three times.
Turn the ignition switch from ’RUN’ to ’OFF’.
Press the power door lock ’UNLOCK’ button three times.
Turn the ignition switch from ’OFF’ to ’RUN’.
Listen for the vehicle’s horn to chirp one time.

That worked fine, I got the one horn chirp but then it says to:

press the power door lock ’UNLOCK’ button one time to command the RAP module to toggle the auto-lock/relock feature ON or OFF.
Press the power door lock ’LOCK’ button once to enter the command.
Listen for the vehicle’s horn to chirp one time.

It would not give the confirmation chirp so I'm baffled as to why it won't work. Ideas?


Post Reply