If you shop at Amazon.com (for anything), use this link to support FordTaurus.net!

PATS programming using forscan

Post Reply
mrbaird2018
New Member
Posts: 1
Joined: Sat May 19, 2018 9:44 pm
Vehicle: 2011 ford Taurus sel

PATS programming using forscan

Post by mrbaird2018 » Wed Jun 06, 2018 10:58 am

Need some help I had one working key when bought this 2011 Taurus and was not sure if it was part of master set so I wanted to make a new set master keys bought 2 rotunda keys for stealership and used forscan with extended license to erase the 2 master keys programed in the car had the 2 new keys cut and tried with forscan to add the new master keys and it does not take them . Sometimes it says 1 know key mostly 0 known keys at loss now I have 3 keys and none work!! Any suggestions or ideas appreciated!!


bartives
New Member
Posts: 2
Joined: Sat Jun 21, 2014 1:25 pm

Re: PATS programming using forscan

Post by bartives » Thu Sep 20, 2018 3:32 pm

Something about wrapping aluminum foil around the key body and MYKEY on Utube. Not sure if that is your issue.

Post Reply